After gaining registration, RTOs need to monitor several aspects including annual declarations, AVETMISS reporting, and marketing compliance, with validation being a major concern.

Though we've written extensively on validation, let's clarify it again. ASQA describes it as a quality assessment review.

In essence, validation confirms which parts of an RTO's assessment process are correct and pinpoints elements for improvement. With a solid grasp of its key components, validation becomes manageable.

According to Clause 1.8 of the SRTOs 2015, RTOs must ensure their assessment systems, including RPL, comply with the training package requirements and are conducted according to the Principles of Assessment and Rules of Evidence.

The standards necessitate conducting two types of validation.

The first validation type ensures your RTO's assessments comply with the training package requirements in your scope.

The next validation type confirms assessments are conducted following the principles of assessment and rules of evidence.

Therefore, validation is conducted both before and after the assessment. This article emphasizes the first type: assessment tool validation.

An Overview of the Two Types of Assessment Validation

An Introduction to Assessment Validation

As noted earlier and in our earlier blogs, validation is divided into two stages: (1) assessment tool validation and (2) post-assessment validation.

Assessment tool validation, also called pre-assessment validation, pertains to ensuring all unit requirements are addressed, as outlined in the first part of the clause, ensuring total workbook compliance.

In post-assessment validation, the emphasis is on implementation, ensuring that Registered Training Organisations conduct assessments as per the Principles of Assessment and Rules of Evidence.

This discussion will center around assessment tool validation.

Procedure for Assessment Tool Validation

Understanding the two types of validation allows us to delve into the specifics of assessment tool validation.

Ideal Times to Conduct Assessment Tool Validation

Assessment tool validation ensures that all elements, performance criteria, and performance and knowledge evidence are included in your assessment tools.

Therefore, whenever you acquire new learning resources, you must conduct assessment tool validation before allowing students to use them.

You don’t need to wait until the next scheduled validation in your 5-year cycle. Immediately validate new resources to ensure they’re ready for student use.

However, this isn't the only time to perform this type of validation. Conduct assessment tool validation also when you:

- resources are updated by you
- your new training products get added on scope
- training product updates are reviewed against your course
- your risk assessment includes identifying your learning resources as a risk

ASQA's risk-based regulation approach means RTOs should perform regular risk assessments. If students complain about learning resources, it's a perfect time for assessment tool validation.

Identifying Training Products for Validation

Remember, this validation aims to ensure all learning resources are compliant before use. All RTOs are expected to validate all unit resources.

Starting Assessment Tool Validation: What You Need

Learning Materials

Given that you are validating your assessment tools, you will need the complete array of your learning resources:

Mapping tool – start with this document. It illustrates which assessment items address unit requirements, making validation quicker.

Learner/student workbook – assess its appropriateness as an assessment tool. Confirm clear instructions and adequate answer fields. This is a common problem.

Assessor guide/marking guide – ensure that instructions for assessors are sufficient and clear benchmarks for each assessment item exist. Clear benchmarks are essential for reliable assessment outcomes.

Other related resources – these might include checklists, registers, and templates developed separately from the workbook and marking guide. Ensure they are appropriate for the assessment task and meet unit requirements.

Team for Validation

Clause 1.11 specifies the requirements for validation panel members. It states validation can be performed by one or more people. However, RTOs usually require all trainers and assessors to participate, sometimes including industry experts.

Your validation panel must, as a group, possess:

Vocational competencies and current industry skills applicable to the unit being validated

Current knowledge and expertise in vocational teaching and learning

Any one of the following training and assessment credentials:

TAE40116 Certificate IV in Training and Assessment or the successor version

Assessment validation checklist/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Using a validation tool helps in both the validation process and documentation. It facilitates seeing how each assessment item matches each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
Additionally, it can act as evidence that you have validated your resources before they are used by students.

ASQA does not provide a recommended or required template for assessment tool validation, but many templates are available online. These tools generally have validators review the tools as a whole to determine if they meet the principles of assessment.

Assessment Principles Form Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable

Though these templates simplify validation, they can lead to judgment errors due to limited space for comments on each assessment item.

We recommend using a more detailed template to examine each unit requirement and the assessment items that correspond to them. Here is an example:

Element Performance Criteria Assessment Instructions Benchmarks Assessment Instrument Rectification Recommendations
What do you Need to Check?
What Needs Review?

As detailed in our blog post Common Problems In Assessment Tools, it is crucial that your assessment tools enable trainers to adhere to assessment principles and evidence rules.

Core Principles of Assessment
Fairness – Are equal opportunity and access ensured for everyone in the assessment process?

Flexibility – Does the assessment provide different options to demonstrate competence according to individual needs and preferences?

Validity – Does the assessment evaluate what it is meant to evaluate? Is it a valid tool for measuring the required skill or knowledge?

Reliability – Will the assessment give consistent results every time, no matter who conducts the training? Will different assessors consistently decide on skill competence?

Evidence Key Rules

Validity – Does the evidence show the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence adequate to ensure the learner has the required skills and knowledge?

Authenticity – Is the assessment tool confirming that the work is the candidate’s own?

Currency – Do the assessment tools align with current units of competency and up-to-date industry practices?

Although these are often addressed in VET professional development and nationally recognised training, numerous tools fail to meet these requirements.

To avoid using learning resources that leave certain unit requirements unaddressed, ensure you adhere to these guidelines:

Show What You Mean

Pay attention to the verbs in the unit requirements and ensure they are addressed by the assessment item. For example, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement asks students to:

Complete each of the following activities at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication according to service and regulatory requirements:

changing nappies

prepare bottles, feed babies from bottles, and clean equipment

solid foods preparation and feeding babies

respond suitably to baby signs and cues

prepare and settle infants for sleep

monitor and foster physical exploration and gross motor skills appropriate for the age

Having students explain the process of nappy changing for babies under 12 months doesn’t meet the unit requirement. Unless it’s meant to assess underpinning knowledge (i.e., knowledge evidence), students should be doing the tasks.

Watch Out for the Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Notice the numbers. In the CHCECE032 example, one unit requirement asks students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby doesn’t meet the requirement.

Entire or Not Competent

Observe the lists. As noted above, if students are asked to perform just half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Give More Specificity

Every assessment item needs clear and specific benchmark answers to guide the assessor’s judgment on student competence. Consequently, ensure your instructions are not confusing for students or ASQA assessment validation guidelines assessors. For example:
What kind of information can be included in a work package?
What kind of information can be included in a work package?

Answers might include:

Necessary resources

Related costs

Time required for activities

Assigned duties and responsibilities

When an assessment item requires multiple answers, indicate the number of answers needed from a student. This way, your assessment is reliable, and the evidence collected is valid.

This also applies to assessment items with double-barrelled questions or those that ask for multiple answers at once. These can confuse students and assessors, as shown in the sample question below:

Name a hazard and/or environmental issue in the work area and choose the most effective hazard control hierarchy.

Answers could include, but are not limited to:

Weather conditions – isolating the work area, engineering controls, personal protective equipment

Work area and ground conditions – elimination, isolation, engineering

People – isolating, use of engineering controls, administration

Structural hazards – substitution, isolation, engineering

Chemical hazards – isolation, engineering, administration

Equipment or machinery – isolation, engineering, administration

Steering clear of double-barrelled questions simplifies responses for students and enables assessors to accurately judge competence.

Seeing these requirements, you might wonder, “Don’t learning resource developers provide audit guarantees?” However, these guarantees mean you must wait for an audit to rectify noncompliance. This affects your compliance history, so it’s wiser to take a safe and compliant approach.